| |
Commercial Grade Aliphatic Assembly
Commercial grade woodworking adhesive, intended for professional hand assembly where economics is a factor. Works extremely well with hardwoods, softwoods, and composites.
* Non-Hazardous, Non-Flammable
* Minimum 40% solids
* Base: Aliphatic Resins
* Appearance: white, yellow, added color to your specs
* Very strong bond, Sandable
* Coverage: 150 - 200 sq. ft. per gal Packaging: 1 gal, 5gal, 55 gal drum, tote bin
___________________________________________________________________________________________________ |
Series Professional Grade Aliphatic Assembly
88550 is s a specially blended, high solids aliphatic, woodworking adhesive. It has an excellent end grain hold out and sanding properties and is not affected by lacquers and sealers. The blended adhesive develops a superior wood-to-wood bond that will meet most demanding applications.
* Ideal for glue-up of solid components and general assembly
* Non-Hazardous
* Minimum 45-50% solids
* Base: Aliphatic Resins
* Appearance: white, yellow, added color to your specs
* Very strong bond
* Coverage: 150 - 200 sq. ft. per gal Packaging: 1 gal, 5 gal, 55 gal drum, tote bin
___________________________________________________________________________________________________ |
Series Water-Resistant Type II Contractor Grade
8850-II is a versatile, custom formulated co-polymer adhesive that's stronger than wood. Offers high performance strength where difficult water resistant applications are essential. Used in Radio-Frequency assembly.
* Water Resistant
* Non-Hazardous, Resists solvents
* Minimum 45-55% solids
* Base: Modified Aliphatic
* Appearance: white, yellow
* Extremely strong bond, Sandable, Fast setting
* Coverage: 150 - 200 sq. ft. per gal Packaging: 1 gal, 5 gal, 55 gal drum, tote bin
___________________________________________________________________________________________________ |
Cross Linking Adhesive
This adhesive
Is a high solid modified aliphatic adhesive containing reactive groups that eliminate the need for a catalyst. It offers high performance where increased water resistance, good heat resistance, and quick setting are required. Recommended for cold press, hot press, or Radio-Frequency assembly. Meets the requirements for ANSI-HPVA Type 2 without addition of catalyst and strain of Group 3 of EN 204.
* Resists Solvents, Non-flammable
* Non-Hazardous, Resists solvents
* Minimum 48 +/- % solids
* Base: Modified Aliphatic
* Appearance: white, yellow
* Extremely strong bond, Sandable, Fast setting
* Coverage: 150 - 200 sq. ft. per gal Packaging: 1 gal, 5 gal, 55 gal drum, tote bin
___________________________________________________________________________________________________ |
Series High Pressure Laminating Glue
This adhesive is a general purpose, laminating adhesive for most HPL and veneer cold press assembly. This series offers options for cold press, hot press, or Radio-Frequency (RF) press laminating.
* Dries to clear
* Non-Hazardous, Non-flammable
* High solids
* Base: Modified aliphatic+ co-polymer
* Appearance: white liquid
* Extremely hard bond, Sandable, Fast setting
* Coverage: 150 - 200 sq. ft. per gal Packaging: 1 gal, 5 gal, 55 gal drum, tote bin
___________________________________________________________________________________________________ |
Special Products and Specialty Glues
These adhesive products are for special purpose; roll laminating for wood to paper or wood to vinyl applications.
* Medium Setting
* High Tack
* High Solids (Min 50% to 58%)
* Base: EVA, PVA
* Appearance: white
* Viscosity: per customer request 1500 cPs to 5000 cPs @ 76F
* Coverage: 150 - 200 sq. ft. per gal Packaging: 1 gal, 5 gal, 55 gal drum, tote bin |
| |
| |
| |
|
|